Installation: Difference between revisions

From PanelForge 4 Documentation
No edit summary
No edit summary
Line 1: Line 1:
=Preparation=
Make sure the target computer system reaches the minimum [[System Requirements]]. Carefully refer to this PanelForge documentation Wiki when required.
The PanelForge software is provided in two forms:
* PanelForge-1_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
* PanelForge-1_X_X-Win64.zip  - A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need of installation.
=Installation=
Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of its nature.
==Windows==
===Standard Installation===
If you have already installed a previous version of ‘PanelForge’ it is required to be uninstalled before continuing.
To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:
* PanelForge-1_X_X-Win64.exe
:[[File: PanelForgeInstaller01.PNG|thumb|98px|none|The PanelForge Installer file.]]
:[[File: PanelForgeInstaller02.PNG|thumb|546px|none|The PanelForge Installer Application Window.]]
The installer will install the following items:
* The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
* A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
* Registry entries for PanelForge Project ‘pfz’ and Panel ‘pfn’ file format association.
* Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
* Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.
===Silent Command Line Installation===
The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/s’ silent flag.
===Portable Installation===
For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
* PanelForge-1_X_X-Win64.zip
First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.
:[[File: PanelForgeInstaller03.PNG|thumb|606px|none|The PanelForge Portable distribution executable.]]
Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.
=Uninstallation=
==Windows==
First exit PanelForge if open before proceeding with uninstallation.
To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used.
The following instructions refer to Windows 7, under other version of Windows the method may vary.
1) Open the Windows 'Control Panels' using the start menu item.
2) Select the 'Uninstall a program' item.
3) In the 'Uninstall or change a program' window double click the 'PanelForge (Pro)' item from the list.
4) Select ‘Yes’ when prompted to uninstall 'PanelForge (Pro).
5) You have now have successfully uninstalled 'PanelForge (Pro)’.
=Troubleshooting=
If you are experiencing unexpected results and require additional support contact use via email: contact@panel-forge.com
==The PanelForge Viewport is not drawing correctly==
Installing a newer graphics card/chipset driver in many cases will fix this issue.
Older versions of Windows may not automatically update graphics card drivers as part of the 'Windows Update' feature.
Official Graphics card/chipset drivers can be found at the following websites depending on model:
[http://www.geforce.com/drivers NVIDIA: http://www.geforce.com/drivers]
=Preparation=
Make sure the target computer system reaches the minimum [[System Requirements]]. Obtain the correct PanelForge software distribution for your computer’s operating system. Carefully refer to this PanelForge documentation wiki when required.
The PanelForge software is provided in three forms:
* PanelForge-1_X_X-Mac64.dmg - A Macintosh OS X compressed disk image containing the ‘PanelForge.app’ OS X application file.
* PanelForge-1_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable and uninstaller in the Windows registry and add a shortcut to PanelForge to the Windows Start Menu.
* PanelForge-1_X_X-Win64.zip - A compressed directory containing the PanelForge Program directory which contains the ‘PanelForge.exe’ executable that can be run without installation for portability and testing.
=Installation=
Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of it's nature.
Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of it's nature.


Line 23: Line 124:
===Portable Installation===
===Portable Installation===


For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
For temporary usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
* PanelForge-1_X_X-Win64.zip
* PanelForge-1_X_X-Win64.zip


Line 29: Line 130:


Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.
Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.
==Macintosh==
If you have already installed a previous version of PanelForge it is recommended to uninstall it before continuing to avoid possible confussion.
To install on Macintosh open the PanelForge disk image file using the OS X Finder:
* PanelForge-1_X_X-Mac64.dmg
In the disk mounted from the above disk image drag the ‘PanelForge’ application file to the ‘Application’ folder. The mounted disk can then be ejected and the copied ‘PanelForge’ application opened.
The ‘PanelForge’ application will open and function correctly if renamed or moved to any other folder although the above placement is recommended.
=Activation=


=Uninstallation=
=Uninstallation=
Line 48: Line 161:


5) You have now have successfully uninstalled 'Garibaldi Express'.
5) You have now have successfully uninstalled 'Garibaldi Express'.
==Macintosh==
First quit PanelForge application if open before proceeding with uninstallation.
Locate the PanelForge application you installed and to the trash.
For complete removal the current users preferences file can be also optional removed from ‘~/Library/Preferences/com.panelforge.PanelForge.plist’.


=Troubleshooting=
=Troubleshooting=


If you are experiencing unexpected results and require additional support contact use via email: contact@panel-forge.com
If you are experiencing unexpected results and require additional support contact use via email: TODO


==The PanelForge Viewport is not drawing Correctly==
==The PanelForge Viewport UI is not drawing Correctly==


Installing a newer graphics card/chipset driver in many cases will fix this issue.
Installing a newer graphics card/chipset driver in many cases will fix this issue.
Line 59: Line 180:


Official Graphics card/chipset drivers can be found at the following websites depending on model:
Official Graphics card/chipset drivers can be found at the following websites depending on model:
[http://downloadcenter.intel.com/ Intel: https://downloadcenter.intel.com/]


[http://www.geforce.com/drivers NVIDIA: http://www.geforce.com/drivers]
[http://www.geforce.com/drivers NVIDIA: http://www.geforce.com/drivers]
[http://support.amd.com/en-us/download AMD/ATI: http://support.amd.com/en-us/download]

Revision as of 16:04, 14 June 2017

Preparation

Make sure the target computer system reaches the minimum System Requirements. Carefully refer to this PanelForge documentation Wiki when required.

The PanelForge software is provided in two forms:

  • PanelForge-1_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
  • PanelForge-1_X_X-Win64.zip - A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need of installation.

Installation

Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of its nature.

Windows

Standard Installation

If you have already installed a previous version of ‘PanelForge’ it is required to be uninstalled before continuing.

To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:

  • PanelForge-1_X_X-Win64.exe
The PanelForge Installer file.
The PanelForge Installer Application Window.

The installer will install the following items:

  • The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
  • A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
  • Registry entries for PanelForge Project ‘pfz’ and Panel ‘pfn’ file format association.
  • Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
  • Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.

Silent Command Line Installation

The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/s’ silent flag.

Portable Installation

For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:

  • PanelForge-1_X_X-Win64.zip

First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.

The PanelForge Portable distribution executable.

Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.

Uninstallation

Windows

First exit PanelForge if open before proceeding with uninstallation.

To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used. The following instructions refer to Windows 7, under other version of Windows the method may vary.

1) Open the Windows 'Control Panels' using the start menu item.

2) Select the 'Uninstall a program' item.

3) In the 'Uninstall or change a program' window double click the 'PanelForge (Pro)' item from the list.

4) Select ‘Yes’ when prompted to uninstall 'PanelForge (Pro).

5) You have now have successfully uninstalled 'PanelForge (Pro)’.

Troubleshooting

If you are experiencing unexpected results and require additional support contact use via email: contact@panel-forge.com

The PanelForge Viewport is not drawing correctly

Installing a newer graphics card/chipset driver in many cases will fix this issue. Older versions of Windows may not automatically update graphics card drivers as part of the 'Windows Update' feature.

Official Graphics card/chipset drivers can be found at the following websites depending on model:

NVIDIA: http://www.geforce.com/drivers







Preparation

Make sure the target computer system reaches the minimum System Requirements. Obtain the correct PanelForge software distribution for your computer’s operating system. Carefully refer to this PanelForge documentation wiki when required.

The PanelForge software is provided in three forms:

  • PanelForge-1_X_X-Mac64.dmg - A Macintosh OS X compressed disk image containing the ‘PanelForge.app’ OS X application file.
  • PanelForge-1_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable and uninstaller in the Windows registry and add a shortcut to PanelForge to the Windows Start Menu.
  • PanelForge-1_X_X-Win64.zip - A compressed directory containing the PanelForge Program directory which contains the ‘PanelForge.exe’ executable that can be run without installation for portability and testing.

Installation

Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of it's nature.

Windows

Standard Installation

If you have already installed a previous version of ‘PanelForge’ it is required to be uninstalled before continuing.

To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:

  • PanelForge-1_X_X-Win64.exe

The installer will install the following items:

  • The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
  • A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
  • Registry entries for PanelForge Project ‘pfz’ and Panel ‘pfn’ file format association.
  • Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
  • Registry entry for PanelForge uninstaller for use with the ‘Uninstall A Program’ Windows Control Panel.

Silent Command Line Installation

The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/s’ silent flag.

Portable Installation

For temporary usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:

  • PanelForge-1_X_X-Win64.zip

First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.

Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.

Macintosh

If you have already installed a previous version of PanelForge it is recommended to uninstall it before continuing to avoid possible confussion.

To install on Macintosh open the PanelForge disk image file using the OS X Finder:

  • PanelForge-1_X_X-Mac64.dmg

In the disk mounted from the above disk image drag the ‘PanelForge’ application file to the ‘Application’ folder. The mounted disk can then be ejected and the copied ‘PanelForge’ application opened. The ‘PanelForge’ application will open and function correctly if renamed or moved to any other folder although the above placement is recommended.

Activation

Uninstallation

Windows

First exit PanelForge if open before proceeding with uninstallation.

To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used. The following instructions refer to Windows 7, under other version of Windows the method may vary.

1) Open the Windows 'Control Panels' using the start menu item.

2) Select the 'Uninstall a program' item.

3) In the 'Uninstall or change a program' window double click the 'Garibaldi Express' item from the list.

4) Select Yes when prompted to uninstall 'Garibaldi Express'.

5) You have now have successfully uninstalled 'Garibaldi Express'.

Macintosh

First quit PanelForge application if open before proceeding with uninstallation.

Locate the PanelForge application you installed and to the trash.

For complete removal the current users preferences file can be also optional removed from ‘~/Library/Preferences/com.panelforge.PanelForge.plist’.

Troubleshooting

If you are experiencing unexpected results and require additional support contact use via email: TODO

The PanelForge Viewport UI is not drawing Correctly

Installing a newer graphics card/chipset driver in many cases will fix this issue. Older versions of Windows may not automatically update graphics card drivers as part of the 'Windows Update' feature.

Official Graphics card/chipset drivers can be found at the following websites depending on model:

Intel: https://downloadcenter.intel.com/

NVIDIA: http://www.geforce.com/drivers

AMD/ATI: http://support.amd.com/en-us/download