Installation: Difference between revisions

From PanelForge 4 Documentation
No edit summary
No edit summary
Line 1: Line 1:
__NOTOC__
__NOTOC__


PanelForge is distributed as an installer executable. After installation PanelForge can be opened via the item added to the Windows start menu (or start screen).
PanelForge is distributed as an installer executable. After installation PanelForge can be opened via the 'PanelForge' item added to the 'Windows Start Menu'.


PanelForge Studio is also provided as a simple zip compressed directory for flexibility allowing multiple versions to be accessed simply in a Studio environment. 


Major PanelForge versions (3.0, 2.0, 1.X) can be installed concurrently. Each version will use independent settings.


PanelForge 2.0 can be installed concurrently with PanelForge 1.X. Each version will use independent settings files and registry entries.
 
<small>'PanelForge Studio' is also provided as a simple zip compressed directory for flexibility allowing multiple versions to be accessed simply in a Studio environment.
</small>




Line 14: Line 16:


The PanelForge software is provided in two forms:
The PanelForge software is provided in two forms:
* '''PanelForge-2_X_X-Win64.exe''' - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
* '''PanelForge-3_X_X-Win64.exe''' - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
* '''PanelForge-2_X_X-Win64.zip'''  - (Studio version only) A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need of installation.
<small>* '''PanelForge-3_X_X-Win64.zip'''  - (Studio version only) A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need for installation.</small>




===Installation===
===Installation===


Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of its nature.
Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detailed description of its nature.




Line 28: Line 30:


To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:
To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:
* '''PanelForge-2_X_X-Win64.exe'''
* '''PanelForge-3_X_X-Win64.exe'''
:[[File: PanelForgeInstaller01.PNG|thumb|98px|none]]
:[[File: PanelForgeInstaller01.PNG|thumb|98px|none]]


:[[File: PanelForgeInstaller02.PNG|thumb|546px|none]]
:[[File: PanelForgeInstaller02.PNG|thumb|546px|none]]


The installer will install the following items:
<small>The installer will install the following items:
* The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
* The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
* A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
* A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
Line 39: Line 41:
* Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
* Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
* Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.
* Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.
 
</small>


====Silent Command Line Installation====
====Silent Command Line Installation====
Line 50: Line 52:


For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
* '''PanelForge-2_X_X-Win64.zip'''
* '''PanelForge-3_X_X-Win64.zip'''


First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.
First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.

Revision as of 21:34, 25 May 2021


PanelForge is distributed as an installer executable. After installation PanelForge can be opened via the 'PanelForge' item added to the 'Windows Start Menu'.


Major PanelForge versions (3.0, 2.0, 1.X) can be installed concurrently. Each version will use independent settings.


'PanelForge Studio' is also provided as a simple zip compressed directory for flexibility allowing multiple versions to be accessed simply in a Studio environment.


Preparation

Make sure the target computer system reaches the minimum System Requirements. Carefully refer to this PanelForge documentation Wiki when required.

The PanelForge software is provided in two forms:

  • PanelForge-3_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.

* PanelForge-3_X_X-Win64.zip - (Studio version only) A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need for installation.


Installation

Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detailed description of its nature.


Standard Installation

If you have already installed a previous version of ‘PanelForge’ you will be prompted for it to be uninstalled before continuing.

To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:

  • PanelForge-3_X_X-Win64.exe
PanelForgeInstaller01.PNG
PanelForgeInstaller02.PNG

The installer will install the following items:

  • The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
  • A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
  • Registry entries for PanelForge Project ‘pfz’ and Panel ‘pfn’ file format association.
  • Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
  • Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.

Silent Command Line Installation

The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/S’ silent flag.

PanelForgeInstaller04.PNG


Portable Installation ('Studio' version only)

For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:

  • PanelForge-3_X_X-Win64.zip

First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.

PanelForgeInstaller03.PNG

Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.


Uninstallation

First exit PanelForge if open before proceeding with uninstallation.

PanelForgeInstaller05.PNG

To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used. The following instructions refer to Windows 7, under other version of Windows the method may vary.

  1. Open the Windows 'Control Panels' using the start menu item.
  2. Select the 'Uninstall a program' item.
  3. In the 'Uninstall or change a program' window double click the 'PanelForge (Studio/Pro)' item from the list.
  4. Select ‘Yes’ when prompted to uninstall 'PanelForge (Studio/Pro).
  5. You have now have successfully uninstalled 'PanelForge (Studio/Pro)’.


Troubleshooting

If you are experiencing unexpected results and require additional support contact use via email: contact@panel-forge.com


The PanelForge Viewport is not drawing correctly

Installing a newer graphics card/chipset driver in many cases will fix this issue. Older versions of Windows may not automatically update graphics card drivers as part of the 'Windows Update' feature.

Official Graphics card/chipset drivers can be found at the following websites depending on model: