Brush Editor Shape - Revision history

James at 00:15, 13 November 2020

2020-11-13T00:15:22Z

← Older revision		Revision as of 00:15, 13 November 2020
Line 1:		Line 1:


	The ~~‘General’~~ tab of the [[Brush Editor]] Palette provides the Shape and Placement settings of the brush stamps that form a brushstroke.		The ‘Shape’ tab of the [[Brush Editor]] Palette provides the Shape and Placement settings of the brush stamps that form a brushstroke.

	:[[File: PaletteBrushEditorShapeComp.png\|thumb\|506px\|none]]		:[[File: PaletteBrushEditorShapeComp.png\|thumb\|506px\|none]]

James at 12:32, 22 October 2020

2020-10-22T12:32:49Z

← Older revision		Revision as of 12:32, 22 October 2020
Line 36:		Line 36:
	===Hardness===		===Hardness===

	'''This setting does not have any ~~affect~~ when using a 'Brush Tip Texture'.'''		'''This setting does not have any effect when using a 'Brush Tip Texture'.'''

	The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.		The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.

James at 12:32, 22 October 2020

2020-10-22T12:32:20Z

← Older revision		Revision as of 12:32, 22 October 2020
Line 36:		Line 36:
	===Hardness===		===Hardness===

	'''This setting does not ~~apply~~ when using a 'Brush Tip Texture'.'''		'''This setting does not have any affect when using a 'Brush Tip Texture'.'''

	The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.		The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.

James at 12:31, 22 October 2020

2020-10-22T12:31:56Z

← Older revision		Revision as of 12:31, 22 October 2020
Line 37:		Line 37:

	'''This setting does not apply when using a 'Brush Tip Texture'.'''		'''This setting does not apply when using a 'Brush Tip Texture'.'''


	The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.		The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.

James at 12:31, 22 October 2020

2020-10-22T12:31:30Z

← Older revision		Revision as of 12:31, 22 October 2020
Line 36:		Line 36:
	===Hardness===		===Hardness===

	~~The brush~~ '~~Hardness~~' ~~sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with~~ a ~~harsh edge, a low value will create a brushstroke with a soft edge~~.		'''This setting does not apply when using a 'Brush Tip Texture'.'''


	''~~'This setting does not apply when using~~ a ~~'Brush Tip Texture'~~.~~'''~~		The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.

James at 12:51, 21 October 2020

2020-10-21T12:51:38Z

← Older revision		Revision as of 12:51, 21 October 2020
Line 103:		Line 103:

	'''Jitter:'''		'''Jitter:'''

			A random amount the 'angle' value of each brush stamp in the stroke will be adjusted.

James at 12:51, 21 October 2020

2020-10-21T12:51:01Z

← Older revision		Revision as of 12:51, 21 October 2020
Line 20:		Line 20:
	How the ‘Size’ value can be adjusted over the brush stroke.		How the ‘Size’ value can be adjusted over the brush stroke.

	* None – The ~~flow~~ value is not affected.		* None – The size value is not affected.
	* Pen Pressure – When using a supported Pen/Stylus input the pressure of the Pen on the drawing surface multiplies the ~~flow~~ value.		* Pen Pressure – When using a supported Pen/Stylus input the pressure of the Pen on the drawing surface multiplies the size value.


Line 39:		Line 39:


	This setting does not apply when using a 'Brush Tip Texture'.		'''This setting does not apply when using a 'Brush Tip Texture'.'''


Line 45:		Line 45:

	The brush ‘Hardness’ controls the opacity falloff amount from the centre to the edge of brush stamps. A 0% value will result in a gradual reduction from the centre to the edge of each brush stamp. With a 100% value, no falloff will be applied resulting in sharp edges of each brush stamp.		The brush ‘Hardness’ controls the opacity falloff amount from the centre to the edge of brush stamps. A 0% value will result in a gradual reduction from the centre to the edge of each brush stamp. With a 100% value, no falloff will be applied resulting in sharp edges of each brush stamp.


	'''Jitter:'''		'''Jitter:'''
Line 53:		Line 54:
	===Proportions===		===Proportions===

	Shape		The brush 'Proportion' controls how square/circular the brush stamps in a brushstroke will be. A lower value will result in a 'Chiseled' style brushstroke.


			'''Shape:'''

			Reducing this value will result in the height as a ratio of the 'size' value of each brush stamp to be reduced.

	~~Dynamics~~

	~~Minimum~~		'''Dynamics:'''

	Jitter		* None – The 'shape' value is not affected.
			* Pen Pressure – When using a supported Pen/Stylus input the pressure of the Pen on the drawing surface multiplies the 'shape' value.


			'''Minimum:'''

			When using a custom 'Dynamics' or 'Jitter' setting this will be the minimum proportion 'shape' value of a brush stamp. The ‘Dynamics’ input will be normalised between this minimum value and the above ‘shape’ setting.


			'''Jitter:'''

			A random amount the proportion 'shape' value of each brush stamp in the stroke will be adjusted.


	===Rotation===		===Rotation===

	Angle		The brush 'Rotation' controls how each brush stamps in a brushstroke will be angled.


			'''Angle:'''

			The value in degrees how much each brush stamp will be rotated in a brushstroke.


			'''FlipX/FlipY:'''

	~~FlipX/FlipY~~		Currently non-functioning

	~~Dynamics~~

	Jitter		'''Dynamics:'''

			* None – The 'angle' value is not affected.
			* Pen Pressure – When using a supported Pen/Stylus input the pressure of the Pen on the drawing surface multiplies the 'angle' angle.
			* Pen Tilt – When using a supported Pen/Stylus input the tilt of the Pen on the drawing surface adds the 'angle' value.
			* Initial Direction – The direction of brushstroke at its beginning will be added to the 'angle' value.
			* Direction – The direction of brushstroke throughout its length will be added to the 'angle' value.


			'''Jitter:'''

James at 12:03, 21 October 2020

2020-10-21T12:03:56Z

← Older revision		Revision as of 12:03, 21 October 2020
Line 1:		Line 1:
	~~<span style="color:#ff0000">'''This page is early work in progress draft~~. ~~Information may be incorrect or incomplete.'''</span>~~

			The ‘General’ tab of the [[Brush Editor]] Palette provides the Shape and Placement settings of the brush stamps that form a brushstroke.

	:[[File: PaletteBrushEditorShapeComp.png\|thumb\|506px\|none]]		:[[File: PaletteBrushEditorShapeComp.png\|thumb\|506px\|none]]


	===Size===		===Size===

	Size:		The brush 'Size' controls the diameter of each individual brush stamps that makes up a brushstroke. Adjusting this setting will result in 'thicker' or 'finer' brushstrokes.


			'''Size:'''

			The diameter in pixels of each brush stamp. When 'dynamics' or 'Jitter' is applied then this value is the maximum brush stamp size.

	~~Dynamics~~

	~~Minimum~~:		'''Dynamics:'''

	Jitter:		How the ‘Size’ value can be adjusted over the brush stroke.

			* None – The flow value is not affected.
			* Pen Pressure – When using a supported Pen/Stylus input the pressure of the Pen on the drawing surface multiplies the flow value.


			'''Minimum:'''

			When using a custom 'Dynamics' or 'Jitter' setting this will be the minimum size of a brush stamp. The ‘Dynamics’ input will be normalised between this minimum value and the above ‘Size’ setting.


			'''Jitter:'''

			A random amount the size of each brush stamp in the stroke will be adjusted.


	===Hardness===		===Hardness===

	Hardness		The brush 'Hardness' sets the size of the opacity falloff around the perimeter of each brush stamp. A large hardness value will produce brushstrokes with a harsh edge, a low value will create a brushstroke with a soft edge.


			This setting does not apply when using a 'Brush Tip Texture'.


			'''Hardness:'''

			The brush ‘Hardness’ controls the opacity falloff amount from the centre to the edge of brush stamps. A 0% value will result in a gradual reduction from the centre to the edge of each brush stamp. With a 100% value, no falloff will be applied resulting in sharp edges of each brush stamp.

			'''Jitter:'''

	~~Jitter~~		A random amount the hardness of each brush stamp in the stroke will be adjusted.

James at 15:48, 5 April 2019

2019-04-05T15:48:31Z

← Older revision		Revision as of 15:48, 5 April 2019
Line 1:		Line 1:
	<span style="color:#ff0000">'''This page is early work in progress draft. Information may be incorrect or incomplete.'''</span>		<span style="color:#ff0000">'''This page is early work in progress draft. Information may be incorrect or incomplete.'''</span>

			:[[File: PaletteBrushEditorShapeComp.png\|thumb\|506px\|none]]

	===Size===		===Size===

James: Created page with "'''This page is early work in progress draft. Information may be incorrect or incomplete.''' ===Size=== Size: Dynamics Minimum: Jitter..."

2019-04-04T21:12:47Z

Created page with "<span style="color:#ff0000">'''This page is early work in progress draft. Information may be incorrect or incomplete.'''</span> ===Size=== Size: Dynamics Minimum: Jitter..."

New page

<span style="color:#ff0000">'''This page is early work in progress draft. Information may be incorrect or incomplete.'''</span>

===Size===

Size:

Dynamics

Minimum:

Jitter:

===Hardness===

Hardness

Jitter

===Proportions===

Shape

Dynamics

Minimum

Jitter

===Rotation===

Angle

FlipX/FlipY

Dynamics

Jitter