Difference between revisions of "Installation"

From PanelForge 3 Documentation
 
(28 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
  
PanelForge is avalible via a installer or zip compressed directory.  
+
PanelForge is distributed as an intuitive Installer Executable. After installation PanelForge can be opened via the 'PanelForge' item added to the 'Windows Start Menu'.
  
Under normal circumstances it's recommended to use the installer based distrubution.  
+
Major PanelForge versions (3.0, 2.0, 1.X) can be installed concurrently. Each version will use independent settings.
  
 +
'PanelForge Studio' is also provided as a simple zip compressed directory for flexibility allowing multiple versions to be accessed simply in a Studio environment. 
  
 
===Preparation===
 
===Preparation===
  
Make sure the target computer system reaches the minimum [[System Requirements]]. Carefully refer to this PanelForge documentation Wiki when required.
+
Make sure the target computer system reaches the minimum [[System Requirements]]. Carefully refer to this PanelForge documentation when required.
  
 
The PanelForge software is provided in two forms:
 
The PanelForge software is provided in two forms:
* '''PanelForge-2_X_X-Win64.exe''' - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
+
* '''PanelForge-3_X_X-Win64.exe''' - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
* '''PanelForge-2_X_X-Win64.zip'''  - A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need of installation.
+
* '''PanelForge-3_X_X-Win64.zip'''  - (Studio version only) A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need for installation.
  
  
===Installation===
+
===Standard Windows Installation===
  
Although the installation of PanelForge is designed to be as easy and intuitive as possible the following provides a detail description of its nature.
+
If you have already installed a previous version of ‘PanelForge’ you will be prompted for it to be uninstalled before continuing.
  
 +
* First 'double click' the '''PanelForge-3_X_X-Win64.exe''' installer executable file icon.
 +
* Then simply follow the simple on-screen instructions.
  
====Standard Installation====
+
:[[File: PanelForgeInstaller02.PNG|frame|546px|none]]
  
If you have already installed a previous version of ‘PanelForge’ it is required to be uninstalled before continuing.
+
<small>The installer will install the following items:
 
 
To install on Windows load the installer executable for PanelForge and follow the simple on screen instructions:
 
* '''PanelForge-2_X_X-Win64.exe'''
 
:[[File: PanelForgeInstaller01.PNG|thumb|98px|none]]
 
 
 
:[[File: PanelForgeInstaller02.PNG|thumb|546px|none]]
 
 
 
The installer will install the following items:
 
 
* The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
 
* The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
 
* A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
 
* A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
Line 36: Line 31:
 
* Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
 
* Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
 
* Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.
 
* Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.
 +
</small>
  
  
====Silent Command Line Installation====
+
===Silent Windows Command Line Installation===
  
 
The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/S’ silent flag.
 
The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/S’ silent flag.
:[[File: PanelForgeInstaller04.PNG|thumb|704px|none]]
+
:[[File: PanelForgeInstaller04.PNG|frame|704px|none]]
  
  
====Portable Installation====
+
===Portable Windows Installation ('Studio' version only)===
  
For portable usage of PanelForge the compressed distribution of the PanelForge Program directory can be used:
+
First, decompress the '''PanelForge-3_X_X-Win64.zip''' file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.
* '''PanelForge-2_X_X-Win64.zip'''
 
  
First decompress the above file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.
+
:[[File: PanelForgeInstaller03.PNG|frame|606px|none]]
 
 
:[[File: PanelForgeInstaller03.PNG|thumb|606px|none]]
 
  
 
Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.
 
Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.
Line 58: Line 51:
 
===Uninstallation===
 
===Uninstallation===
  
First exit PanelForge if open before proceeding with uninstallation.
+
First, exit PanelForge if open before proceeding with uninstallation.
  
:[[File: PanelForgeInstaller05.PNG|thumb|531px|none]]
+
:[[File: PanelForgeInstaller05.PNG|frame|531px|none]]
  
 
To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used.  
 
To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used.  
The following instructions refer to Windows 7, under other version of Windows the method may vary.
+
The following instructions refer to Windows 7, under other versions of Windows the method may vary.
  
 
# Open the Windows 'Control Panels' using the start menu item.
 
# Open the Windows 'Control Panels' using the start menu item.
Line 70: Line 63:
 
# Select ‘Yes’ when prompted to uninstall 'PanelForge (Studio/Pro).
 
# Select ‘Yes’ when prompted to uninstall 'PanelForge (Studio/Pro).
 
# You have now have successfully uninstalled 'PanelForge (Studio/Pro)’.
 
# You have now have successfully uninstalled 'PanelForge (Studio/Pro)’.
 
 
===Troubleshooting===
 
 
If you are experiencing unexpected results and require additional support contact use via email: contact@panel-forge.com
 
 
 
====The PanelForge Viewport is not drawing correctly====
 
 
Installing a newer graphics card/chipset driver in many cases will fix this issue.
 
Older versions of Windows may not automatically update graphics card drivers as part of the 'Windows Update' feature.
 
 
Official Graphics card/chipset drivers can be found at the following websites depending on model:
 
 
 
* [https://www.nvidia.com/Download NVIDIA: https://www.nvidia.com/Download]
 
* [https://www.amd.com/en/support AMD: https://www.amd.com/en/support]
 
* [https://downloadcenter.intel.com/ Intel: https://downloadcenter.intel.com/]
 

Latest revision as of 14:16, 10 August 2021


PanelForge is distributed as an intuitive Installer Executable. After installation PanelForge can be opened via the 'PanelForge' item added to the 'Windows Start Menu'.

Major PanelForge versions (3.0, 2.0, 1.X) can be installed concurrently. Each version will use independent settings.

'PanelForge Studio' is also provided as a simple zip compressed directory for flexibility allowing multiple versions to be accessed simply in a Studio environment.

Preparation

Make sure the target computer system reaches the minimum System Requirements. Carefully refer to this PanelForge documentation when required.

The PanelForge software is provided in two forms:

  • PanelForge-3_X_X-Win64.exe - A Windows installer executable that will install the PanelForge Program directory and register the PanelForge executable with Windows.
  • PanelForge-3_X_X-Win64.zip - (Studio version only) A compressed directory containing the PanelForge Program directory. Contains a ‘PanelForge.exe’ executable that can be run directly without the need for installation.


Standard Windows Installation

If you have already installed a previous version of ‘PanelForge’ you will be prompted for it to be uninstalled before continuing.

  • First 'double click' the PanelForge-3_X_X-Win64.exe installer executable file icon.
  • Then simply follow the simple on-screen instructions.
PanelForgeInstaller02.PNG

The installer will install the following items:

  • The PanelForge program directory (default into the Windows ‘ProgramFiles’ directory).
  • A Shortcut to the PanelForge executable and uninstaller executable into the Windows Start Menu.
  • Registry entries for PanelForge Project ‘pfz’ and Panel ‘pfn’ file format association.
  • Registry entries for PanelForge Project and Panel file format icons for use in Windows Explorer.
  • Registry entry for PanelForge uninstaller for use with the ‘Uninstall a Program’ Windows Control Panel.


Silent Windows Command Line Installation

The above installer executable can also be used via the Windows Command Prompt without the display of graphical windows. This mode can be activated using ‘/S’ silent flag.

PanelForgeInstaller04.PNG


Portable Windows Installation ('Studio' version only)

First, decompress the PanelForge-3_X_X-Win64.zip file, then open the ‘panelforge.exe’ Windows executable file in the decompressed PanelForge Program directory.

PanelForgeInstaller03.PNG

Using this installation method for a permanent solution is not recommend as it will not provide the optimal experience with the Windows operating system.


Uninstallation

First, exit PanelForge if open before proceeding with uninstallation.

PanelForgeInstaller05.PNG

To uninstall PanelForge the Windows 'Uninstall or Change a Program' Control Panel can be used. The following instructions refer to Windows 7, under other versions of Windows the method may vary.

  1. Open the Windows 'Control Panels' using the start menu item.
  2. Select the 'Uninstall a program' item.
  3. In the 'Uninstall or change a program' window double click the 'PanelForge (Studio/Pro)' item from the list.
  4. Select ‘Yes’ when prompted to uninstall 'PanelForge (Studio/Pro).
  5. You have now have successfully uninstalled 'PanelForge (Studio/Pro)’.