Difference between revisions of "Canvas Tools"

From PanelForge 3 Documentation
Line 73: Line 73:
  
 
==Spacing==
 
==Spacing==
 +
 +
The spacing level control specifies the spacing between brush stamps based on a brush stamps current radius. A level of 100% will cause no brush stamp overlapping, where as a low spacing level will cause brush to overlap more tightly.
 +
 
==Smoothing==
 
==Smoothing==
 +
 +
When the freeform brush type is active this mode optional provides a smooth quadratic interpolation between the input cursors sample points.
 +
 +
Under normal operation this option is recommended to be active.
 +
 
==Pressure==
 
==Pressure==
 +
 +
If a pressure sensitive input device is being used such as a Wacom graphics tablet then these options allow the input pressure is dynamically affect the brush tool output. The following options are available:
 +
 +
===Disabled===
 +
 +
Even if a pressure sensitive input device is available the pressure input will be ignored.
 +
 +
===Flow===
 +
 +
The amount of pressure input is multiplies brush flow amount. The result is updated as each brush stamp is produced.
 +
 +
===Radius===
 +
 +
The amount of pressure input is multiplies brush radius amount. The result is updated as each brush stamp is produced.
 +
 +
===Flow and Radius===
 +
 +
Both the flow and radius amounts of the brush are both modified as specified above.
 +
 
==Behind==
 
==Behind==
 +
 +
When this setting is active instead of the paint brush compositing pixel data on top of the current canvas layer the paint stroke will composited under the current layer data.
 +
  
 
=Eraser Brush Tool=
 
=Eraser Brush Tool=
  
 
:[[File:CanvasToolsEraserBrush01.png|thumb| 222px |none| Eraser Brush Tool.]]
 
:[[File:CanvasToolsEraserBrush01.png|thumb| 222px |none| Eraser Brush Tool.]]
 +
 +
The eraser brush tool provides an interactive tool to manipulate the pixel transparency of areas of the current canvas layer. Circular stamps of reduced opacity will be produced at regular intervals on the current canvas layer based on the following settings:
  
 
==Type==
 
==Type==
 +
 +
Four brush types are provides that produce different results when using the mouse to interact with the canvas view.
 +
 +
===Freeform===
 +
 +
Clicking and dragging the mouse cursor in the canvas view will produce brush stamps under the mouse cursor at regular intervals as it is moved.
 +
 +
===Line===
 +
 +
Clicking and dragging the mouse cursor between two points in the canvas view will produce a line comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced line to Horizontal or Vertical orientation.
 +
 +
===Rectangle===
 +
 +
Clicking and dragging the mouse cursor between two points in the canvas view will produce a rectangle comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a square.
 +
 +
===Oval===
 +
 +
Clicking and dragging the mouse cursor between two points in the canvas view will produce an oval comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a circle.
 +
 
==Flow==
 
==Flow==
 +
 +
The flow level controls the transparency of each individual brush stamps. A flow level of 100% will provide a strong brush stroke, a lower flow level will provide a more natural fluid brush stroke.
 +
 
==Opacity==
 
==Opacity==
 +
 +
The opacity level controls transparency of the complete brush stroke. A opacity level lower than 100% provides maximum strength of the brush stroke, a lower opacity will not allow any element of a brush stoke to be above the specified opacity even if the same area is interacted with multiple times.
 +
 
==Radius==
 
==Radius==
 +
 +
The radius control specifies the maximum radius of brush stamps in pixels. If a pressure sensitive input device is used and pressure sensitivity settings are active then the radius of brush stamps may be smaller than this specified radius.
 +
 
==Hardness==
 
==Hardness==
 +
 +
The hardness level controls the amount a brush stamp fades around it's edge. A hardness of 100% will mean no edge fading with happen. 0% hardness will produce a brush stamps opacity to fade from the completly way from centre to edge.
 +
 
==Spacing==
 
==Spacing==
 +
 +
The spacing level control specifies the spacing between brush stamps based on a brush stamps current radius. A level of 100% will cause no brush stamp overlapping, where as a low spacing level will cause brush to overlap more tightly.
 +
 
==Smoothing==
 
==Smoothing==
 +
 +
When the freeform brush type is active this mode optional provides a smooth quadratic interpolation between the input cursors sample points.
 +
 +
Under normal operation this option is recommended to be active.
 +
 
==Pressure==
 
==Pressure==
 +
 +
If a pressure sensitive input device is being used such as a Wacom graphics tablet then these options allow the input pressure is dynamically affect the brush tool output. The following options are available:
 +
 +
===Disabled===
 +
 +
Even if a pressure sensitive input device is available the pressure input will be ignored.
 +
 +
===Flow===
 +
 +
The amount of pressure input is multiplies brush flow amount. The result is updated as each brush stamp is produced.
 +
 +
===Radius===
 +
 +
The amount of pressure input is multiplies brush radius amount. The result is updated as each brush stamp is produced.
 +
 +
===Flow and Radius===
 +
 +
Both the flow and radius amounts of the brush are both modified as specified above.
 +
 +
==Behind==
 +
 +
When this setting is active instead of the paint brush compositing pixel data on top of the current canvas layer the paint stroke will composited under the current layer data.
 +
  
 
=Fill Bucket Tool=
 
=Fill Bucket Tool=

Revision as of 18:39, 18 July 2015

The 'Canvas Tools' palette provides the ability to select the current interactive tool active in the canvas workspace. The palette also makes available all the available settings to currently active canvas workspace tool.

Canvas Tools Palette with Settings Collapsed.

To set the active canvas workspace select the corresponding tool icon button. The active canvas tool settings can be displayed or hidden by clicking the active canvas tool settings label below the canvas tool icon buttons.

The ability to quickly switch between different canvas tools is provided by custom Keyboard Shortcuts.


Hand Tool

Hand Tool.

The hand tool provides ways to interactively navigate the canvas view.

Pan Canvas

When the pan canvas mode is selected the canvas can be quickly panned by pressing and dragging the mouse cursor in the canvas viewport area.


Zoom Tool

Zoom Tool.

The zoom tool provides ways to interactively zoom the canvas view.

Drag Zoom

When the pan canvas mode is selected the canvas can be quickly zooms by pressing and dragging the mouse cursor in the canvas viewport area. The current centre of the canvas view will be retained as view is zoomed in and out.


Paint Brush Tool

Paint Brush Tool.

The paint brush tool provides an interactive tool to manipulate the pixel colours of areas of the current canvas layer. Circular stamps of the current tool colour will be produced at regular intervals on the current canvas layer based on the following settings:

Type

Four brush types are provides that produce different results when using the mouse to interact with the canvas view.

Freeform

Clicking and dragging the mouse cursor in the canvas view will produce brush stamps under the mouse cursor at regular intervals as it is moved.

Line

Clicking and dragging the mouse cursor between two points in the canvas view will produce a line comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced line to Horizontal or Vertical orientation.

Rectangle

Clicking and dragging the mouse cursor between two points in the canvas view will produce a rectangle comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a square.

Oval

Clicking and dragging the mouse cursor between two points in the canvas view will produce an oval comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a circle.

Flow

The flow level controls the transparency of each individual brush stamps. A flow level of 100% will provide a strong brush stroke, a lower flow level will provide a more natural fluid brush stroke.

Opacity

The opacity level controls transparency of the complete brush stroke. A opacity level lower than 100% provides maximum strength of the brush stroke, a lower opacity will not allow any element of a brush stoke to be above the specified opacity even if the same area is interacted with multiple times.

Radius

The radius control specifies the maximum radius of brush stamps in pixels. If a pressure sensitive input device is used and pressure sensitivity settings are active then the radius of brush stamps may be smaller than this specified radius.

Hardness

The hardness level controls the amount a brush stamp fades around it's edge. A hardness of 100% will mean no edge fading with happen. 0% hardness will produce a brush stamps opacity to fade from the completly way from centre to edge.

Spacing

The spacing level control specifies the spacing between brush stamps based on a brush stamps current radius. A level of 100% will cause no brush stamp overlapping, where as a low spacing level will cause brush to overlap more tightly.

Smoothing

When the freeform brush type is active this mode optional provides a smooth quadratic interpolation between the input cursors sample points.

Under normal operation this option is recommended to be active.

Pressure

If a pressure sensitive input device is being used such as a Wacom graphics tablet then these options allow the input pressure is dynamically affect the brush tool output. The following options are available:

Disabled

Even if a pressure sensitive input device is available the pressure input will be ignored.

Flow

The amount of pressure input is multiplies brush flow amount. The result is updated as each brush stamp is produced.

Radius

The amount of pressure input is multiplies brush radius amount. The result is updated as each brush stamp is produced.

Flow and Radius

Both the flow and radius amounts of the brush are both modified as specified above.

Behind

When this setting is active instead of the paint brush compositing pixel data on top of the current canvas layer the paint stroke will composited under the current layer data.


Eraser Brush Tool

Eraser Brush Tool.

The eraser brush tool provides an interactive tool to manipulate the pixel transparency of areas of the current canvas layer. Circular stamps of reduced opacity will be produced at regular intervals on the current canvas layer based on the following settings:

Type

Four brush types are provides that produce different results when using the mouse to interact with the canvas view.

Freeform

Clicking and dragging the mouse cursor in the canvas view will produce brush stamps under the mouse cursor at regular intervals as it is moved.

Line

Clicking and dragging the mouse cursor between two points in the canvas view will produce a line comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced line to Horizontal or Vertical orientation.

Rectangle

Clicking and dragging the mouse cursor between two points in the canvas view will produce a rectangle comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a square.

Oval

Clicking and dragging the mouse cursor between two points in the canvas view will produce an oval comprising of brush stamps at regular intervals. A dashed line is provided during tool interaction to indicate where the output stamps will be produced. Holding the Shift key during tool interaction will snap the produced rectangle to be a circle.

Flow

The flow level controls the transparency of each individual brush stamps. A flow level of 100% will provide a strong brush stroke, a lower flow level will provide a more natural fluid brush stroke.

Opacity

The opacity level controls transparency of the complete brush stroke. A opacity level lower than 100% provides maximum strength of the brush stroke, a lower opacity will not allow any element of a brush stoke to be above the specified opacity even if the same area is interacted with multiple times.

Radius

The radius control specifies the maximum radius of brush stamps in pixels. If a pressure sensitive input device is used and pressure sensitivity settings are active then the radius of brush stamps may be smaller than this specified radius.

Hardness

The hardness level controls the amount a brush stamp fades around it's edge. A hardness of 100% will mean no edge fading with happen. 0% hardness will produce a brush stamps opacity to fade from the completly way from centre to edge.

Spacing

The spacing level control specifies the spacing between brush stamps based on a brush stamps current radius. A level of 100% will cause no brush stamp overlapping, where as a low spacing level will cause brush to overlap more tightly.

Smoothing

When the freeform brush type is active this mode optional provides a smooth quadratic interpolation between the input cursors sample points.

Under normal operation this option is recommended to be active.

Pressure

If a pressure sensitive input device is being used such as a Wacom graphics tablet then these options allow the input pressure is dynamically affect the brush tool output. The following options are available:

Disabled

Even if a pressure sensitive input device is available the pressure input will be ignored.

Flow

The amount of pressure input is multiplies brush flow amount. The result is updated as each brush stamp is produced.

Radius

The amount of pressure input is multiplies brush radius amount. The result is updated as each brush stamp is produced.

Flow and Radius

Both the flow and radius amounts of the brush are both modified as specified above.

Behind

When this setting is active instead of the paint brush compositing pixel data on top of the current canvas layer the paint stroke will composited under the current layer data.


Fill Bucket Tool

Fill Bucket Tool.

Tolerance

Restrict to Canvas

Restrict to Range

Eyedropper Tool

Eyedropper Tool.

Sample All Visible Layers

Move Tool

Move Tool.

Show Boundary

Free Transform Tool

Free Transform Tool.

Flip Horizontal

Flip Vertical

Rotate -45 Degrees

Rotate +45 Degrees

Rectangle Selection Tool

Rectangle Selection Tool.

Lasso Selection Tool

Lasso Selection Tool.

Freeform

Polygonal

Magic Wand Selection Tool

Magic Wand Selection Tool.

Tolerance

Restrict to Canvas

Restrict to Range